Adjustable DC Power Supply Chrome Plating Rectifier with Remote Control 12V 2000A 24KW

Product Description:

The GKD12-2000CVC dc regulated power supply has 24KW output power. It has 6 fans to lower the temperature. Its structure is composed of IGBT、fast recovery diode、self-designed circuit board and copper.

Product size: 63*39.5*53cm

Net weight: 61.5kg

Send Email to Us

Specification
Faucet Type	Bathroom Sink Faucets,
Installation Type	Centerset,
Installation Holes	One Hole,
Number of Handles	Single Handle,
Finish	Ti-PVD,
Style	Country,
Flow Rate	1.5 GPM (5.7 L/min) max,
Valve Type	Ceramic Valve,
Cold and Hot Switch	Yes,
Dimensions
Overall Height	240 mm ( 9.5 " ),
Spout Height	155 mm ( 6.1 " ),
Spout Length	160 mm ( 6.3 " ),
Faucet center	Single Hole,
Material
Faucet Body Material	Brass,
Faucet Spout Material	Brass,
Faucet Handle Material	Brass,
Accessories Information
Valve included	Yes,
Drain included	No,
Weights
Net Weight (kg)	0.99,
Shipping Weight (kg)	1.17,

feature

Input Parameters

AC Input 380V Three Phase
Output Parameters

DC 0~12V 0~2000A continuously adjustable
Output Power

24KW
Cooling Method

Forced air cooling
PLC Analog

0-10V/ 4-20mA/ 0-5V
Interface

RS485/ RS232
Control Mode

Remote control
Screen Display

Digital screen display
Multiple Protections

OVP, OCP, OTP, SCP protections
Control Way

PLC/ Micro-controller

Model & Data

Model number	Output ripple	Current display precision	Volt display precision	CC/CV Precision	Ramp-up and ramp-down	Over-shoot
GKD12-2000CVC	VPP≤0.5%	≤10mA	≤10mV	≤10mA/10mV	0~99S	No

Product Applications

This dc power supply is commonly employed in the field of passivation treatment.

Passivation Treatment

Passivation is a chemical process used to enhance the corrosion resistance of metals, particularly stainless steel. DC power supplies play a crucial role in controlling the passivation process by providing the necessary electrical current and voltage.

Powder coating is a dry finishing process using sprayers to apply finely ground paint particles to a substrate using electrostatic charge. Powder adheres to the substrate by electrostatic attraction until melted and fused into a uniform coating in a curing oven.

Powder
Liquid coatings are the highest volume finish type for OEMs and product finishers. Industrial paint application methods include methods like spray painting, dip coating and flow coating.

Liquid Coating
Anodizing is one of the most common surface treatments of aluminum. In all anodizing processes, the basic reaction is conversion of the aluminum surface to aluminum oxide. The aluminum part, when made anodic in an electrolytic cell, causes the oxide layer to become thicker, leading to better corrosion and wear resistance. For decorative purposes, the oxide layer formed on the surface can be dyed. In aluminum anodizing processes, the basic reaction is a conversion of the aluminum surface to aluminum oxide, including Type I—Chromic acid anodizing, Type II—Sulfuric acid anodizing, Type III—Hard coat anodizing.

Aluminum Anodizing
Ecoat is a process by which electrically charged particles are deposited out of a water suspension to coat a conductive part. E-coat is a prevalent finish used in the automotive industry.

E-Coat