12v 3000a IGBT Dc Electroplating Power Supply Nickel Copper Plating Rectifier

Product Description:

high frequency 12v 3000a forced air cooling copper electroplating rectifier

Features:

Our high frequency 12v 3000a forced air cooling copper electroplating rectifier uses famous brand components and international advanced full bridge inverter technology of precision machining, so that the performance of the whole dc yellow white zinc plating rectifier power supply 12v 200a is stable,quality is more reliable.
Whole high frequency 12v 3000a forced air cooling copper electroplating rectifier has the function of over voltage, over current, over temperature, short circuit, equal and automatic protection alarm function and soft start function. And can be equipped with time control and computer interface.
DC output waveform is high frequency square waveform, ripple factor less than 1%, can increase plating, refuse passivation, enhance the gloss of the plating coating surface and the core of the dark corner of plating coating. And can reduce the loss of raw materials, to achieve a variety of special requirements of electroplating industry.

copper electroplating rectifier cooling method:

high frequency 12v 3000a forced air cooling copper electroplating rectifier adopts air cooling/water cooling design, easy to install. With remote control device, simple operation. Can switch off the machine when loading, reduce cumbersome procedures of adjustment.

high frequency 12v 3000a forced air cooling copper electroplating rectifier advantage of small size and energy saving:

Small size, light weight, the whole high frequency 12v 3000a forced air cooling copper electroplating rectifier use a full range of anti-corrosion technology, enhanced the product’s anti corrosion ability, extend the service life.
High efficiency, energy saving, work efficiency can reach more than 90%, any voltage current ratio is always linear matching. Eliminating the need for traditional rectifiers regulator and the main transformer loss, energy saving in more than 35%, greatly reducing the electro plating cost, which is the most sensible choice for surface treatment plating machine industry

Send Email to Us

Specification
Faucet Type	Bathroom Sink Faucets,
Installation Type	Centerset,
Installation Holes	One Hole,
Number of Handles	Single Handle,
Finish	Ti-PVD,
Style	Country,
Flow Rate	1.5 GPM (5.7 L/min) max,
Valve Type	Ceramic Valve,
Cold and Hot Switch	Yes,
Dimensions
Overall Height	240 mm ( 9.5 " ),
Spout Height	155 mm ( 6.1 " ),
Spout Length	160 mm ( 6.3 " ),
Faucet center	Single Hole,
Material
Faucet Body Material	Brass,
Faucet Spout Material	Brass,
Faucet Handle Material	Brass,
Accessories Information
Valve included	Yes,
Drain included	No,
Weights
Net Weight (kg)	0.99,
Shipping Weight (kg)	1.17,

feature

Output Voltage

0-10V constantly adjustable
Output Current

0-2500A constantly adjustable
Output Power

0-25KW
Efficiency

≥85%
Output Power

72KW
Certification

CE ISO900A
Features

rs-485 interface, touch screen plc control, current and voltage can be adjusted independently

Model & Data

Product Name	Plating Rectifier 24V 300A High Frequency DC Power Supply
Current Ripple	≤1%
Output Voltage	0-24V
Output Current	0-300A
Certification	CE ISO9001
Display	Touch screen display
Input Voltage	AC Input 380V 3 Phase
Protection	Over-voltage, Over-current, Over-temperature, Over-heating, lack phase, shoert circuit

Product Applications

One of the primary applications for this plating power supply is in the anodizing industry. Anodizing is a process where a thin layer of oxide is created on the surface of a metal in order to improve its corrosion resistance, wear resistance, and other properties. The plating power Supply is designed specifically for use in this process, providing a reliable and consistent source of power that is essential for achieving high-quality results.

In addition to anodizing, this plating power supply can also be used in a variety of other applications. For example, it can be used in electroplating, where a thin layer of metal is deposited onto a conductive surface. It can also be used in electroforming, where a metal object is created by depositing metal onto a mold or substrate.

The plating power supply is also ideal for use in a variety of different scenarios. For example, it can be used in a laboratory setting, where researchers need a reliable and consistent source of power for their experiments. It can also be used in a production environment, where it is essential to have a power supply that can deliver high-quality results consistently and efficiently.

Overall, the plating power supply 24V 300A is a versatile and reliable power supply that is ideal for use in a wide range of different applications and scenarios. Whether you are working in the anodizing industry, electroplating, electroforming, or any other field that requires a reliable source of power, this pulse power supply is an excellent choice.

Customization

Our plating rectifier 24V 300A programmable dc power supply can be customized to meet your specific needs. Whether you require a different input voltage or a higher power output, we are happy to work with you to create a product that fits your requirements. With CE and ISO900A certification, you can trust the quality and reliability of our products.

Support and Services:
Our plating power supply product comes with a comprehensive technical support and service package to ensure that our customers can operate their equipment at its optimal level. We offer:

24/7 phone and email technical support
On-site troubleshooting and repair services
Product installation and commissioning services
Training services for operators and maintenance personnel
Product upgrades and refurbishment services
Our team of experienced engineers and technicians are dedicated to providing prompt and efficient support and services to minimize downtime and maximize productivity for our customers.