6V 12V 15V 0~300A High Precision Plating Rectifier

Product Description:

Features:

Flatwise drawer type and convenient movement with handle.
High control precision, low ripple wave coefficient, uniform current distribution and stronger uniform plating capability.
Regulated voltage and regulated current control mode are optional.
High efficiency and power factor with energy-saving.
Distinctive anti-corrosion and sealing design enables placement at any position around the tank.
Soft start, over-temperature, over-load, over-voltage, short circuit and current limit protection.
The three proofing glue is used to prevent against salt, fog and acidification in the internal PCB boards, increasing the environmental anti-corrosion capability of electronic components.

Product size: 43.5*38*22.5cm

Net weight: 24kg

Send Email to Us

Specification
Faucet Type	Bathroom Sink Faucets,
Installation Type	Centerset,
Installation Holes	One Hole,
Number of Handles	Single Handle,
Finish	Ti-PVD,
Style	Country,
Flow Rate	1.5 GPM (5.7 L/min) max,
Valve Type	Ceramic Valve,
Cold and Hot Switch	Yes,
Dimensions
Overall Height	240 mm ( 9.5 " ),
Spout Height	155 mm ( 6.1 " ),
Spout Length	160 mm ( 6.3 " ),
Faucet center	Single Hole,
Material
Faucet Body Material	Brass,
Faucet Spout Material	Brass,
Faucet Handle Material	Brass,
Accessories Information
Valve included	Yes,
Drain included	No,
Weights
Net Weight (kg)	0.99,
Shipping Weight (kg)	1.17,

feature

Input Parameters

AC Input 480v±10% 3 Phase
Output Parameters

DC 0~50V 0~5000A continuously adjustable
Output Power

250KW
Cooling Method

forced air cooling / water cooling
PLC Analog

0-10V/ 4-20mA/ 0-5V
Interface

RS485/ RS232
Control Mode

remote control design
Screen Display

digital display
Multiple Protections

lack phase over-heating over-voltage over-current short circuit
Control Way

PLC/ Microcontroller

Model & Data

Model number	Output ripple	Current display precision	Volt display precision	CC/CV Precision	Ramp-up and ramp-down	Over-shoot
GKD15-300CVC	VPP≤0.5%	≤10mA	≤10mV	≤10mA/10mV	0~99S	No

Product Applications

Surface treating electroplate for chrome, gold, silver, nickel, zinc, metal, PCB board and etc.

Copper plating: priming, enhance the ability to adhere to the plating layer, and the ability to resist corrosion. (Copper is easy to oxidation, oxidation, copper green no longer conductive, so copper-plated products must do copper protection)

Nickel plating: priming or appearance, to enhance the corrosion resistance and wear resistance, (where the chemical nickel for the modern process of wear resistance than chrome plating). (Note that many electronic products, such as DIN head, N head, no longer use nickel priming, mainly because nickel is magnetic, will affect the electrical properties inside the passive intermodulation)