News - 12V 1500A Polarity Reverse Plating Rectifier

12V 1500A Polarity Reverse Plating Rectifier

1.Introduction

This power supply is suitable for three-phase four wire 415VAC * 3ph-50 (60) Hz power supply environment, with positive and negative rated DC commutation output function, simple operation, wide application range, and flexible use.

2.Main technical indicators

Electrical projects		Technical indicators
AC Input	Three phase four wire system （L1-L2-L3-PE）	415VAC±10%,50/60HZ
DC Output	Rated voltage	0～12V adjustable
	Rated current	0～1500 adjustable
	efficiency	≥85%
Protection	Output overvoltage	Shutdown
	Output overcurrent	Shutdown
	Overheat protection	Shutdown
Environment condition		-10℃～45℃ 10%～95%RH

3.Reverse mode：

Setting the positive and negative values of output voltages v1 and v2 to determine the output commutation mode:

When V1 is set to a positive value and V2 is set to a negative value, The power supply will operate in a positive negative cycle state.

Non Reverse mode:

When V1 and V2 are both set to positive values, the power supply will work consistently in the forward output state, that is, the forward DC output state

If only the first operating parameters (V1, A1, T1) are set, and the operating parameters of V2 are all set to 0, the power supply will only work in the slow rise V1 (A1) stage until the total working time reaches the end of the operation;

2) When V1 and V2 are both set to negative values, the power supply will work consistently in the negative output state, that is, the negative DC output state;

parameters of V2 are all set to 0, the power supply will only work in the slow rise V1 (A1) stage until the total working time reaches the end of the operation;

Note: Determine the power output mode based on the production process and set corresponding operating parameters; Only by using the power supply correctly can qualified products be produced.

4.Products Display